Humax DTR-T2000 500GB YouView+ HD Smart Digital TV Recorder


  1. Home
  2. Set Top Boxes
  3. Set Top Boxes
  4. 258/9378

Support options

Humax Support

  • Call: 0344 318 8800
  • Mon-Fri: 9am to 5:30pm
  • Sat: 10am to 4pm
  • Sun: 11am to 3pm

Email me this page

Share this page

Product details

  • Brand: Humax
  • Catalogue number: 258/9378
  • Manufacturer's number: HDR-2000T 500GB

FAQ Questions & Answers Videos Returns policy

Frequently Asked Questions

  • Ideally the set top box needs to connect to an external household aerial. If this is unavailable an indoor aerial can be used, but the channels received will be dependent on the quality and power of the signal in your area.
  • The Set top box will operate normally without broadband connection and you will be able to view Freeview channels, however you will not have access to on demand content such as BBC iPlayer.
  • Please click here and enter your postcode for the most up to date coverage.

  • Please watch the below video which will guide you through a simple process.  All you will need is a smart phone with a camera and of course your remote control!

  • If you have previously had good coverage, and you have now lost some of your channels, try retuning your set top box to reload channels. If channels are still missing you may need to clear the memory of your box before retuning. Make sure it is turned off and unplug the aerial. Turn on the equipment again and retune without the aerial; your box won't find any channels. Turn off the equipment again and plug the aerial back in. After restoring the power, do a full retune using the first time installation’ option (sometimes called ‘default or factory settings). You should find your channels return. If you are not certain about how to do a full retune of your equipment, check your manual for instructions. There are also local factors to consider if you have lost a block of channels only, for example a portion of the local signal may have been reduced in power or work could be being carried out.

  • 1.       Press the Home button on the remote.
    2.       Scroll to Settings and press OK.
    3.       Scroll to System Info and press OK.
    4.       Press the coloured buttons in the following order
              Red, Green, Yellow, Blue, Green, Yellow and Blue (this brings up a hidden menu).
    5.       Scroll to Reset PIN and press OK.
    6.       PIN is now reset to 0000.

  • Every box comes with an HDMI cable and an Ethernet cable, there is a SCART output on the rear of the box but you will need to purchase a SCART lead as there is no SCART Lead included.
  • Please click here to see the most up to date list of channels available in your area.

  • Yes, this set top box will connect with a household aerial, we would recommend using an external household aerial where possible.


Installation video

Specification video

Returns Policy

If you need advice about your product, please in the first instance contact the support provider using the number on this support page. If your product has developed a fault or you need to return it then please visit our most up to date returns policy here.

Similar products