Skip to main content
BAUMATIC BWMI1472DN1 INT WASHING MACHINE

Product details

  • Brand: Baumatic
  • Catalogue number: 274/5071
  • Manufacturer's number: BWMI1472DN1

Baumatic Support

Call:
0118 9336 911
Mon-Fri: Sat: Sun:
8am to 5pm 9am to 12pm Closed

Email me this page

Enter your email address to have this page emailed to you *

* This form collects your email address purely for the purpose of enabling us to send you the link to this support page. We do not retain or indeed use your email address for any other purposes.

FAQs

This is normally due to a blockage to the pump.  Please refer to your instruction manual & clear any foreign objects/blockages.

Please fully remove your dispenser (refer to your instruction manual) & thoroughly clean.  Prior to placing the dispenser draw back, ensure there are no blockages or foreign objects in the path of the draw.

Please wash/wipe down the rims of your appliance and run a service wash.  This is normally a 90 degrees wash with an empty drum (please refer to your user manual)

Ensure that the appliance is level and on a solid floor. If the issue persists, please contact the product helpline on the right hand side of this page.

Undertake a high temparature service wash using a washing machine cleaner. Please refer to your instruction manual on how to do this.

Please check your drainage pipeand ensure there are no 'kinks' or that the pipe has been squashed in any way as this will reduce or stop the water from draining properly.

Please ensure you have removed the 'transit bolts', refer to your instruction manual on how to do this.

If you are out of guarantee and you do not have an extended warranty (breakdown care plan etc), we can still offer you a repair service.

Repair and Care will provide a prompt repair for white goods items that are under eight years old, please click here for more information and book your repair today.

Please check your outlet/drainage hose connections at the rear of your appliance.  Please also ensure there are no 'kinks' to the waste pipe.

This is normally due to a 'loading' issue or your machine is out of balance.  Please take the following steps to correct this issue...

Loading issue

Remove all of the washing

- Replace the washing ensuring not to overfill (the drum should be no more than half full to allow space for the water/detergent to circulate and to ensure a good wash).

- Re-commence the desired programme


Out Of Balance

Unplug your machine

- Pull out your machine

- Level the machine by rotating the feet at the bottom on each corner.  Placing a spirit level on the top f your appliance will help with this process.

- Replace your machine & plug back into the socket

- Re-commence the desired programme

How-to videos

  • How to change your plugs fuse

  • How to maintain your washing machine

  • Unpack & Install Your Washing Machine

Returns policy

If you need advice about your product, please in the first instance contact the support provider using the number on this support page.

If your product has developed a fault or you need to return it then please visit our most up to date returns policy here.